Break Strength Comparisons

Breaking Strains are calculated according to Yarn Tenacity Specifications supplied by yarn manufacturer. These should be used as an indication only. Rope must be tested for specific uses. Breaking strain is not the Safe Working Load. Variations up to 25% can occur with poor splices or short lengths. Working load must never exceed 20% of the strengths shown in the table below. Never allow product to come in contact with sharp edges under load. Neither IRB nor its suppliers will in any circumstances be liable for any damage arising out of the improper use of the product.

Sydney Rigging Specialists

Sydney Rigging Specialists ABN 15 096 213 642

5 Wellington Street Rozelle NSW 2039 Australia

Tel. (+612) 9555 4277

Email: admin@rigging.com.au